Blog

Feb 24, 2024

Elevating conveyor safety

The critical role that conveyors play across all industries is undisputed. Whether it’s in a factory or out at a mine, conveyors offer an efficient solution for moving products from one place to

The critical role that conveyors play across all industries is undisputed. Whether it’s in a factory or out at a mine, conveyors offer an efficient solution for moving products from one place to another.

Unfortunately, they are also one of the most dangerous pieces of equipment at an industrial work site, says Steve Hittmann, Motion’s category manager – industrial drive systems and mobile final drives.

“All conveyors have multiple nip and crush points with the capacity to pull operators or site personnel into the equipment, causing serious injury or even fatality,” he said.

“Even while under maintenance conditions, locked and isolated conveyors have the chance of moving and causing injury and should be mechanically clamped and held to prevent any movement.”

To expand further, Hittmann notes that conveyors are generally categorised into two major types – incline and horizontal. Both have inherent risks.

In regards to inclined conveyors – while these are often the smartest tool available for transporting products at a steady pace from point A to point B and overcoming the inertia of gravity – they pose a serious hazard if the motor stops or a conveyor belt has not been serviced or set up correctly.

The weight of the goods on the belt can combine with gravity to reverse the motion of the belt and fling the product it’s carrying back down the slope.

“Uncontrolled loads from an incline conveyor can cause serious operator or personnel safety issues causing the conveyor to run backward with the potential for many tonnes of product falling or spilling from the conveyor while the load is not controlled,” Hittmann said.

“This can put operators in serious danger of being crushed.”

Conversely, horizontal conveyors pose a similar safety risk to operators and personnel, but by running forward.

“A horizontal conveyor creates a load with inertia which when uncontrolled can continue to run forward with the potential for many tonnes of product falling or spilling from the conveyor while the load is not controlled,” Hittmann said.

It’s for this reason conveyor belts are required by law to have backstops and anti-roll back technology installed in order to be approved for use.

While conveyor braking and emergency stop systems are governed by Australian Standard AS1755-2000 (1971), the implementation of this standard appears to differ across the country.

Hittmann says when in doubt, operators should aim high.

“There seems to be growing confusion around the different types of stopping mechanisms applied to ensure conveyors meet legal design requirements and are safe to operate,” Hittmann said.

“Regulatory bodies across Australia differ in their approach to what is required, and it would be my suggestion for all operators to ensure their equipment meets not only the regulations required but also ensures the safety of their workers. Both Queensland and New South Wales require compliance with Australian Standard 1755 as a legal requirement, while in Western Australia the requirements differ to some degree.”

Whether it’s incline conveyor or a horizontal conveyor system, a lack of emergency braking can also have costly side effects.

“From a production perspective the cost of flooding a system with uncontrolled product can be an expensive fix,” Hittmann said.

On the positive side, these accidents are avoidable, with a range of products on the market specifically designed to prevent conveyor belts from rolling unhindered.

The stopping options most used by industry fit into two main categories:

Hittmann says any conveyor system should be fitted with a negative brake unit to ensure the safety of all operators and site personnel.

Additionally, he says any incline conveyor must have a backstop, anti-roll back or sprag clutch bearing within the conveyor drive system. The backstop for the incline drive may be externally mounted to the conveyor drum shaft, or internally positioned within the drive reducer.

A solution that Motion customers can access and rely on is the Rexnord Falk True Hold Low Speed Backstops solution.

“Many of our customers trust the Rexnord brand and for good reason – the design, engineering and manufacturing of their drive packages are excellent,” Hittmann said.

“Rexnord Falk True Hold Low Speed Backstops is an instant-response, no slip solution that can increase the safety and reliability of equipment by preventing reverse rotations.”

Moreover, Hittmann notes that the customers can choose from a range of package options depending on whether the drive is in a single, tandem, or multiple backstop configuration.

DEHACO TERA 60

$65,000

Loganholme, QLD

SPRAYSTREAM SPRAY STREAM

$12,345

Stapylton, QLD

DONALDSON-TORIT DB-3000

$14,500

Sunshine North, VIC

2023 LEOTECH ROTOFOG RFA 20 - DUST SUPPRESSION SYSTEM

$1

Somersby, NSW

DCE VOKES DALAMATIC DUST EXTRACTOR

$21,000

Sunshine North, VIC

2023 LEOTECH MOTOFOG MFX20 MOBILE DUST SUPPRESSION SYSTEM

POA

Somersby, NSW

2023 LEOTECH MOTOFOG MF60D MOBILE DUST SUPPRESSION SYSTEM Motofog

POA

POA

per day (HIRE)

Somersby, NSW

2023 LEOTECH MOTOFOG MF40D MOBILE DUST SUPPRESSION SYSTEM Motofog

POA

POA

per day (HIRE)

Somersby, NSW

CENTRIFUGAL PADDLE BLOWER FAN WITH CYCLONE 11KW

$11,000

Broadmeadows, VIC

BLOWER CENTRIFUGAL FAN - 5.5KW

$3,500

Broadmeadows, VIC

ALFRED DURST 651288

$1,850

South Granville, NSW

AEROVENT LARGE STAINLESS STEEL CENTRIFUGAL HIGH PRESSURE BLOWER FAN - 1.5KW

$5,000

Broadmeadows, VIC