Products

DESCRIPTION

Basic Info.

Model NO.	MFP-136HA(W)
Mounting	Ceiling Mount
Lifetime	>20 years
Certification	RoHS, ISO
Condition	New
Power Input	40 W
Heating Capacity	3100 W
Advantage 2	Water Pump
Advantage 1	with Remote Controller
Air Volume	380
Cooling Capacity	2000 W
Pipe No.	2-Pipe / 4-Pipe
Name	Fan Coil Unit
Transport Package	Honeycomb Carton
Specification	592*592*242
Trademark	VENTTK
Origin	Shanghai
Production Capacity	1500

Product Description

High static pressure duct fan coil unit with 2 pipe system (FCU)

DUCT TYPE FAN COIL UNIT model:

model	unit	MFP-136HA(W)	MFP-170HA(W)	MFP-204HA(W)	MFP-238HA(W)	MFP-272HA(W)	MFP-306HA(W)	MFP-340HA(W)	MFP-408HA(W)
High speed	m3/h	1360	1700	2040	2380	2720	3060	3400	4080
Medium speed	m3/h	1090	1360	1635	1900	2180	2450	2720	3260
Low speed	m3/h	815	1020	1225	1430	1630	1830	2040	2450
Cooling capacity	kW	7.2	9	10.8	12.6	14.4	16.2	18	21.6
Heating capacity	kW	10.8	13.5	16.2	18.9	21.6	24.3	27	32.4
Water volume	m3/h	1.23	1.54	1.85	2.16	2.46	2.77	3.08	3.7
Static pressure	Pa	120	120	120	120	120	120	120	120
Water pressure dropping	kPa	25	28	30	35	36	42	43	50
fan	type	double inlet forward-curve centrifugal fan
	quantity	1	2
Motor	type	3 speed permanent split capacity motor
	quantity	1
	power supply	220V~ 50Hz 1Ph
	power input(w)	380	420	450	520	550	880	900	1100
Coil	type	Copper tube coat aluminum fin
	working pressure	1.6MPa
	faced area(m2)	0.256	0.285	0.285	0.334	0.334	0.402	0.402	0.494
Pipe connection	water inlet	3/4"
	water outlet	3/4"
	water drainage	3/4"

DUCT TYPE FAN COIL UNIT Features:
1. 4-way air flowing, which can uniform temperature distribution in the room.
2. Thin design unit which can be installed in a limit ceiling(the Min. thickness is 290mm.
3. Specially design to avoid the air-short flowing.
4. Easy to be installed,Low installation cost.
5. Remote controller is standard and wire controller is optional.
6. Auto swing.
7. Quiet running.
8.High lift water drained pump(750mm).
9. Float switch inside to prevent from leaking.
10. External drained part is optional.
11. Fresh air can be input from outdoor to better indoor air quality.
12. Auxiliary duct is available to send part of air to other place, in order to improve indoo.r temperatuerl air equality.
13. Negative ion generator is optional.
14. Griall is optional to prevent from hand injury.
15. "C"type heat exchanger, blue fin.
16. Fan and fan motor is easy to maintain.
17. Square panels ,which can choose the direction of inlet/outlet water connection freely.
18. The dimension of K1 unit is only 570×570mm, which can be installed in a standard ceiling opening.
19. Easily interfaced with most widely used Mod-Bus and proprietary supervisory system based on mod Bus protocol.
20. Water valve installed is optional.
21. 4-tube system is optional.